Contact: [email protected]
Contact: [email protected]
Products
CHAIN
CHAIN SLINGS & COMPONENTS
RIGGING HARDWARE
Block
Anchor Chain & Marine Fittings
Stainless Steel Products
Webbing Sling
Hoist & Accessories
Case
News
G210 SCREW PIN CHAIN SHACKLE
- Permanent Identification: Working Load Limit markings shown on every shackle.
- Forged, Quenched & Tempered: High-strength alloy steel body with alloy bolts for maximum toughness and reliability.
- Finish Options: Hot-dip galvanized (G) stocked for corrosion resistance; self-colored (S) available by special order.
- Small Sizes: Sizes 3/8″ and below are mechanically galvanized.
- Fatigue Rated: Tested to 20 000 cycles at 1.5 × WLL (1/3 t – 55 t) for long service life.
- Temperature Range: Approved for use from −40 °F (−40 °C) to 400 °F (204 °C).
- Standards Compliance: Meets or exceeds ASME B30.26 requirements.
- +86 0532 68722298
Products Introduction
Specifications
| Dimensions (in) | ||||||||||||
| Size | WLL (t) | Weight (lb) | A | B | C | D | E | F | G | K | L | M |
| 1/4" | 1/2 | 0.11 | 0.47 | 0.32 | 0.25 | 0.25 | 0.97 | 0.62 | 0.87 | 1.59 | 0.19 | 1.43 |
| 5/16" | 3/4 | 0.17 | 0.53 | 0.38 | 0.31 | 0.31 | 1.15 | 0.75 | 1.04 | 1.91 | 0.22 | 1.71 |
| 3/8" | 1 | 0.28 | 0.66 | 0.44 | 0.38 | 0.38 | 1.42 | 0.92 | 1.25 | 2.31 | 0.25 | 2.06 |
| 7/16" | 1-1/2 | 0.43 | 0.75 | 0.5 | 0.44 | 0.44 | 1.63 | 1.06 | 1.45 | 2.67 | 0.31 | 2.37 |
| 1/2" | 2 | 0.65 | 0.81 | 0.63 | 0.5 | 0.5 | 1.81 | 1.18 | 1.63 | 3.03 | 0.38 | 2.69 |
| 5/8" | 3-1/4 | 1.25 | 1.06 | 0.75 | 0.63 | 0.63 | 2.32 | 1.5 | 2 | 3.76 | 0.44 | 3.34 |
| 3/4" | 4-3/4 | 2.26 | 1.25 | 0.88 | 0.81 | 0.75 | 2.75 | 1.81 | 2.38 | 4.53 | 0.5 | 3.97 |
| 7/8" | 6-1/2 | 3.16 | 1.44 | 1 | 0.97 | 0.88 | 3.2 | 2.1 | 2.81 | 5.33 | 0.5 | 4.5 |
| 1" | 8-1/2 | 4.75 | 1.69 | 1.16 | 1 | 1 | 3.69 | 2.38 | 3.19 | 5.94 | 0.56 | 5.13 |
| 1-1/8" | 9-1/2 | 6.75 | 1.81 | 1.25 | 1.25 | 1.13 | 4.07 | 2.68 | 3.56 | 6.78 | 0.63 | 5.97 |
| 1-1/4" | 12 | 9.06 | 2.03 | 1.41 | 1.38 | 1.25 | 4.53 | 3 | 3.93 | 7.5 | 0.69 | 6.5 |
| 1-3/8" | 13-1/2 | 11.63 | 2.25 | 1.56 | 1.5 | 1.38 | 5.01 | 3.31 | 4.36 | 8.28 | 0.75 | 6.93 |
| 1-1/2" | 17 | 15.95 | 2.38 | 1.66 | 1.62 | 1.5 | 5.38 | 3.62 | 4.87 | 9.05 | 0.81 | 7.43 |
| 1-3/4" | 25 | 26.75 | 2.88 | 2.03 | 2.12 | 1.75 | 6.38 | 4.19 | 5.76 | 10.97 | 1 | 9.19 |
| 2" | 35 | 42.31 | 3.25 | 2.28 | 2.36 | 2.1 | 7.25 | 5 | 6.75 | 12.74 | 1.13 | 10.36 |
| 2-1/2" | 55 | 71.75 | 4.12 | 2.78 | 2.63 | 2.63 | 9.38 | 5.68 | 8 | 14.85 | 1.38 | 13.17 |
Related Products
Inquiry
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.
- E-mail:[email protected]
- TEL:+86-532-8309-2988